DANH MỤC SẢN PHẨM
HỖ TRỢ
Tài liệu kỹ thuật
THỐNG KÊ
- Đang online: 7
- Lượt truy cập: 1254264
SẢN PHẨM
Đồng hồ đo lưu lượng xăng dầu cho tàu thuyền, các trạm nạp xăng dầu tại cầu cảng...
Lưu lượng từ 1.5m3/h cho đến 180 m3/h, Sai số ±0.2 %
Kích thước DN-40, DN-50, DN80, DN-100 và đặc biệt DN-150
Xuất xứ Châu âu, chất lượng cực kỳ ổn định, rất bền phù hợp cho môi trường khắc nghiệt
Đồng hồ đo lưu lượng xăng dầu GESPASA M100
Đo lưu lượng: Dầu DO, xăng, các loại hóa chất khác.. ứng dụng cho các tàu cá, tàu vận chuyển dầu, các trạm nạp xăng dầu tại cầu cảng....
- The M series meter is a positive displacement meter for liquids. It is designed for liquid measurement both in transfer and process control. Because of its design, it is easy to keep and can suit a wide range of applications.
- The M series rotary flow meter has a simple and efficient design consisting of a housing and three rotors that rotate in unison (at the same time) within the measuring chamber.
- The absence of wear, from no metal-to-metal contact inside the chamber, eliminates any deterioration in accuracy and provides a long service life.
- The rotors are composed of bearings inserted into two bearing plates, where at the end of each rotor shaft there is a timing gear. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, which gives a consistent and superior measurement of accuracy.
FEATURES
- It has built in an air eliminator.
- The excellent stepless adjusting device allows a micro-adjustment of the meter.
- High accuracy and repeatabiliy over the widest range of flow, superior accuracy at constant flow;
- Low maintenance, no metal-to-metal contact in measuring chamber, long life service;
- Accuracy regardless of the pressure fluctuations, temperature variation, viscosity;
- Aluminium body, Viton seal, register in gallons and litres;
- It includes a strainer with a mesh of 80/170 μm (micron).
OPTIONAL
- Pulser
- Mechanical predeterminer + cut-off valve
M-40 · HIGH FLOW MECHANICAL METER
- Flow: 25-250 l/min
- Volume per round: 0.309 L
- Size: 1 1/2"
- Working temperature: -40 ºC · 71 ºC
- Max. pressure: 10 bar
- Accuracy: 0.2 %
- Repeat: < 0.07 %
- Packing size: 510x460x490 mm
- Gross weight: 25 kg
M-50 · HIGH FLOW MECHANICAL METER
- Flow: 55-550 l/min
- Volume per round: 0.681 L
- Size: 2"
- Working temperature: -40 ºC · 71 ºC
- Max. pressure: 10 bar
- Accuracy: 0.2 %
- Repeat: < 0.07 %
- Packing size: 510x460x490 mm
- Gross weight: 28 kg
M-80 · HIGH FLOW MECHANICAL METER
- Flow: 115-1,150 l/min
- Volume per round: 1.839 L
- Size: 3"
- Working temperature: -40 ºC · 71 ºC
- Max. pressure: 10 bar
- Accuracy: 0.2 %
- Repeat: < 0.07 %
- Packing size: 580x500x610 mm
- Gross weight: 47 kg
M-100 · HIGH FLOW MECHANICAL METER
- Flow: 170-1700 l/min
- Volume per round: 5.102 L
- Size: 4"
- Working temperature: -40 ºC · 71 ºC
- Max. pressure: 10 bar
- Accuracy: 0.2 %
- Repeat: < 0.07 %
- Packing size: 760x640x720 mm
- Gross weight: 93 kg
M-150 · HIGH FLOW MECHANICAL METER
Flow: 300-3,000 l/min
Volume per round: 9.507 L
Size: 6"
Working temperature: -40 ºC · 71 ºC
Max. pressure: 10 bar
Accuracy: 0.2 %
Repeat: < 0.07 %
Packing size: 800x650x790 mm
Gross weight: 180 kg
*Available with mechanical register, pulser or electronic display
SẢN PHẨM KHÁC